Dongguan imported lamp beads 2835LED lamp belt cost

When it comes to LED light strips, some owners may be very unfamiliar. Although some owners know but only know LED lights, they may not be familiar with other specific conditions. Imported lamp beads 2835LED strips The regular LED strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static moisture-proof packaging bags on the outside. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. Today, I will borrow the information from the Shenzhen Lighting Factory Decoration Company to introduce one of the knowledge about LED light strips-the classification of LED light strips. Let's take a closer look now! 5630LED lamp with double row highlighting 180 beads, ceiling outdoor waterproof lamp for living room ceiling. Imported lamp beads 2835LED strips currently commonly used LED strip types are 3528 and 5050 strips (3528 refers to the size of the LED light source, length 32mm wide and 28 mm, 5050 refers to the length and width of the LED light source are 50 mm), two The difference is that on the one hand, the size is different. On the other hand, there are 3 LED chips in the 5050 lamp beads. Therefore, under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED strip. The new 5630 light strip, imported Korean Samsung light source, suitable for high-end clubs, villas, luxury home decoration, outdoor lighting, pure copper wire. To do a good job of LED light strips need to include various factors such as craftsmanship, technology, and service. Imported lamp bead 2835LED lamp with LED2835 0.2w attached lamp with board, when the whole board is tested, it does not light up for a few lessons, and there are two possibilities for a single test to light up. The first is that the local lamp bead connection line on the light board is open; The second is that the lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the whole board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. Many companies will choose to abandon the production of this product for short-term profit considerations. The lighting factory is not afraid of hardships and marches forward courageously on the LED light belt.