Dongguan constant current 2835led light strip factory

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or ribbon-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light, because the shape is like a strip when it emits light Named from the light belt. The color rendering problem of the constant current 2835led light strip LED light strip is not very important when the product is used in indirect lighting lamp troughs, but when used in large-area luminous ceilings as basic lighting or used in showcases as a display When lighting, the color rendering index Ra>80 is a requirement that a professional LED strip must meet. This is also a requirement of the national standard GB50034-2013. In the decoration process, the lamp belt selection skills and the decoration effect are introduced. 5630LED lamp with double row highlighting 180 beads, ceiling outdoor waterproof lamp for living room ceiling. Constant current 2835led lamp with LED lamp with a fixed number of beads per meter. 1210 is 60 lights, 5050 is 30 lights. If there are special requirements, if 50 lights per meter, it is necessary to modify the circuit. Usually it is a group of 3 LEDs. If it is 50 lights, there will be a group of insufficient quantity, but if it becomes a group of two LEDs, the resistance of the current-limiting resistor will be increased, which will cause a waste of resources. Therefore, when customizing LED strips, be sure to pay attention to the number of lamp beads is a multiple of 3, the new 5630 strips, imported Korean Samsung light source is suitable for high-end clubs, villas, luxury home decoration, outdoor lighting, pure copper wire. If you want to do a good job of LED light strips, you need to include various factors such as process, technology, and service. Constant current 2835led light strips are connected to use. The length of each light strip can be connected, which has a lot to do with the width of the circuit and the thickness of the copper foil when designing. Because the current intensity per unit area is related to the cross-sectional area of u200bu200bthe line, if this is not considered when wiring, then when the connection length exceeds the current that the line can withstand, the light strip will heat up due to overcurrent. While damaging the circuit board, it also reduces the service life of LEDs. Many companies choose to abandon the production of this product for short-term profit considerations. The lighting factory is not afraid of hardships and marches forward bravely on the LED light belt.