Design of 3014 LED strip light without dark area in Huizhou

The reason why LED lighting is popular is not only because it saves electricity, but also because it can produce beautiful effects in every residence. It is difficult not to use LED in modern design. The SMD5050 used in the 3014 LED light with no dark zone is packaged with Taiwan's high-brightness chip, and the luminous flux is 1-2lm higher than that of the ordinary chip. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. Today, Shenzhen Lighting Factory gives you some suggestions and examples about LED strips. Take a look at the suggestions below to get some new ideas for your own decoration design. LED specifications: Ultra-bright SMD LED light color: no dark area 3014 LED light strips Because the led light strips are to be connected for use, how long each light strip can be connected, and the width of the circuit and the copper foil when designing Thickness has a lot to do with it. Because the current intensity per unit area is related to the cross-sectional area of u200bu200bthe line, if this is not considered when wiring, then when the connection length exceeds the current that the line can withstand, the light strip will heat up due to overcurrent. While damaging the circuit board, it also reduces the service life of the LED. Red/yellow/blue/green/cool white/positive white/natural white/warm white/RGB/special color/special color temperature, power supply, controller and other ancillary products can be provided . Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether there will be dust accumulation, the need for a sheath, and the 3014 LED strip without dark area depends on the packaging. Regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside. The counterfeit version of the LED light strip will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look closely at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. Don’t just look at it. To the advantage of the protective sleeve, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.