Will the rail LED spotlights roll over? Take a look at the photoelectric small coup||

Professional lighting design is always inseparable from the support of high-quality LED lighting fixtures; then, who support is needed for high-quality LED lighting fixtures? Take the guide rail LED spotlight as an example, it needs professional installation skills to support it in order to show a professional project implementation outlook, which is an important embodiment of an enterprise's technical services! Maybe you will encounter such a situation. The track light on the aluminum square ceiling is facing one side, but after the installation, the center of gravity shifts, causing the entire track to turn over. What's more sad is that the previous effort has been exhausted. Put up a rollover schematic diagram Today, Optoelectronics wants to share with you how to solve the problem that the rail LED spotlight will roll over? First of all, we need to understand, what is aluminum square ceiling? As shown in the picture above, the strips of aluminum may be aluminum plates. If it is a higher level, it is a square pass. The gap between two aluminum square passes can also be equipped with rails. As shown in the picture above, a guide rail generally has a hoisting point in the middle part, which is convenient to install the track spotlight on it. Under normal circumstances, if only one lamp is installed, the guide rail will not roll over. But if you install more lights, the guide rail will be crooked. So how to solve it? The first method is to find a heavier lamp facing the other side and balance the center of gravity. Of course, this extensive solution is only suitable for use in private spaces or places that do not require high levels of aesthetics. Then in the commercial lighting environment, in another What if one side does not necessarily need light? Method 2: Use hard screw rod for hoisting on both sides and choose hard screw rod and hoisting. The screw rod is not directly hung on the center point in the middle of the guide rail, but is clamped on both sides of the guide rail through a slot. The force on both sides as shown in the figure above, coupled with the hard screw, is more stable. Method 3: Fix the track of the track spotlight within the height of the aluminum square through the screw rod, fix it on the auxiliary keel, and then nail it to the auxiliary keel inside to effectively avoid rollover. Note that the track should be installed on the square pass. The bottom of it touches the auxiliary keel. Use a four-bar screw to secure it in this place, and directly nail the track to the keel. Receiving the track box inside, revealing a little lamp cap, this kind of ceiling has a new height of beauty. IF-ICS series guide rail LED spotlights follow the characteristics of the lighting environment and choose a suitable lighting scheme. The high-quality light effect and beautified appearance of track LED spotlights can be used for the purpose of absorbing sunshine. In lighting projects, Optoelectronics strives to provide professional lighting design and program deepening design, and create beneficial value for customers in product application, project implementation, and continuous high-quality after-sales service! Introduction Optoelectronics focuses on lighting design, production and construction, providing overall solutions for LED lighting projects such as airports, hotels, commerce, and offices, and is the designated lighting supplier for major domestic airports. ---Contact address: Lighting selection website on the floor of Changhong Science and Technology Building, Science and Technology Park, Nanshan District, Shenzhen