Why choose lighting?

A lighting source called 'lighting' was unveiled, and it is planned to be widely used in factories, schools, squares, road lighting and other places across the country in recent years. It is reported that the energy saving of lighting products is as high as 50%-90%. Compared with traditional light sources such as incandescent lamps, fluorescent lamps, high-pressure mercury lamps, and high-pressure sodium lamps, lighting has the lowest energy consumption under the same illuminance. Lighting lighting has the following characteristics: 1. Long life of lighting: There are no filaments and electrodes in the lighting bulb, and the life of the bulb depends only on the natural attenuation of the phosphor. It is the longest life light source among all light sources. Design low-frequency lighting service life index ≥ 100,000 hours, integrated low-frequency lighting or high-frequency lighting service life index ≥ 60,000 hours, life expectancy is 50 times that of incandescent lamps, and 10 times that of metal halide lamps.　　2. High-efficiency and energy-saving lighting: The power factor is more than 98%, reducing reactive power loss; it saves more than 70% energy than incandescent lamps, and more than 50% energy-saving than high-pressure mercury lamps and high-pressure sodium lamps. 3. The lighting is green and environmentally friendly: it adopts solid amalgam and lead-free glass, which meets the regulations of international environmental protection organizations; no flicker, no glare, completely eliminates eye fatigue; low current harmonics, in line with national electromagnetic compatibility standards (GB17443-1999), No external interference.　　4. High color rendering of lighting: low light decay, color temperature 2700K~6500K, color rendering index ≥80, soft light color, showing the natural color of the object. The luminous flux retention rate for 2000 hours is 95%; the luminous flux retention rate for 20000 hours is 80%; the luminous flux retention rate for 60,000 hours is 75%.　　5. Instant start and restart of the lighting: ≤0.5 seconds when starting and restarting for the first time, no preheating is required, and the number of switches is unlimited.　　6. u200bu200bThe lighting is shock-proof and has a wide operating temperature range. Because there are no filaments and electrodes in the bulb, it has good seismic performance; in addition, the surface temperature of the lighting bulb is low after being ignited, which is practical for explosion-proof occasions. It can work normally in the range of -40℃～+50℃.　The advantages of lighting are being used by lighting designers and researchers in the design of factory lighting, road lighting, and petrochemical lighting. At present, lighting fixtures are under continuous development, and lighting will be more used in factory lighting, tunnel lighting, road lighting, school lighting, etc., and become a new choice of lighting sources.