Yangjiang constant current 2835led light strip manufacturer
Cut light strip
The LED light strip is a circuit structure composed of 3/6 LEDs in series and parallel, and every 3 LEDs can be cut and used individually.
The cutting method of the light strip is that the blank space of every 3 or 6 lights on the light strip is a cutting place. If you cut it in other places, it will damage the circuit of this section of the light strip and cause the light strip to be damaged. .
When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strips, and compare them side by side, observe with your eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. The adjustable temperature 3014 LED strip also ensures the color gradation from the bottom to the top of the ceiling. The SMD5050 used in the constant current 2835led strip is packaged with Taiwan's high-brightness chip, and the luminous flux is 1-2lm higher than ordinary chips. . A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light, which will not affect the entire light strip. In addition, the double-sided light box lens 3535 LED light strip that illuminates the ridgeline of the relief can highlight the architectural details of the ceiling space. The whole is natural and unique.