Use LED downlights, panel lights and other lamps to achieve office lighting, but do you know the installation skills? ||

Lighting, a word that gives people bright, is not difficult to make people feel the source of hope; then, in the prospect of office lighting, how to use LED downlights, panel lights and other LED lighting fixtures to rationally design and create efficient , Comfortable and aggressive working environment? It is one of the issues that lighting designers should consider! The so-called 'heart' design and creation, and the 'heart' feel and experience, but that's all! Take a look at the installation skills of LED downlights, panel lights and other lamps. A good lighting design is nothing more than a reasonable lighting technique. Today, we will come to understand with the optoelectronics, the places that need to be paid attention to during the installation of LED lights to avoid the phenomenon of dead lights! , Inspection When the LED lamp is taken out, its integrity should be checked first. If the lamp is damaged, it cannot be installed and used. , Keep away from flammable materials. When installing the LED lights in office building lighting, they should be far away from flammable materials, at least to ensure that there is an interval of m, and pay attention to separate low voltage and high voltage wiring. 、Fixation In order to ensure that the electrical connection line is firmly fixed, you can use a wire clamp to fix the back line. The photoelectric embedded LED downlight IF-IDL series, the length of the power cord ensure that the power cord of the lamp has sufficient length and will not be subject to tension. Avoid excessive rubbish on the connecting wire of the lamp, nor should the connecting wire become knotted. In addition, pay attention to the difference in the output connection, and don't mix it with other lamps. , The connection of the input end and the switching power supply After the installation of the LED lamps, attention should be paid to connecting the low-voltage plug of the lamp and the low-voltage plug of the switching power supply to the input end of the lamp and the switch. Photoelectric LED panel lights, such as the commonly used LED panel lights in office and office building lighting, can be installed in many ways, such as embedded, ceiling and suspended, etc. We can choose the appropriate installation method for the environment and space. The embedded installation fits with the sheet metal groove on the ceiling, and the height between the lamp surface and the bracket needs to be adjusted to a plane. Lift and fix the card holder, put the screws into the card holder and fix it on the ceiling, and then lock the wire clamp to the card holder, then adjust the length of the steel rope, connect the power supply and use it! Different installation methods reflect different feelings; 'taste and emotion' is the quality and responsibility of a designer, and use LED downlights, panel lights and other lighting fixtures to design personalized lighting audiences It is countless! Don't let any aesthetics become visual pollution, go forward courageously with Optoelectronics, and spare no effort! Introduction Optoelectronics focuses on lighting design, production and construction, providing overall solutions for LED lighting projects such as airports, hotels, commerce, and offices, and is the designated lighting supplier for major domestic airports. ---Contact address: Lighting selection website on the floor of Changhong Science and Technology Building, Science and Technology Park, Nanshan District, Shenzhen