Urban lighting lighting engineering company Lighting Factory Briefly describes the office building ambient light distribution requirements of the lighting scheme design
by：EME LIGHTING
2021-03-22
The people in the lighting factory of the urban lighting engineering firm believe that a bright office environment can improve people's office efficiency, work enthusiasm and interest. The brightness of the office mainly depends on the size and distribution of the indoor brightness, of course...
People in the lighting factory of urban lighting lighting engineering company believe that a bright office environment can improve people's office efficiency, work enthusiasm and interest. The brightness of the office mainly depends on the size and distribution of the indoor brightness, of course, it also has a lot to do with the color change of the indoor surface. The size and distribution of the room-internal brightness can be adjusted by the brightness-degree of the lamp-tool, the distribution-distribution of the lamp-tool, and the reflection-reflection-ratio of different surfaces.
The people in the lighting factory of the urban lighting lighting engineering company believe that the change of indoor brightness is the prerequisite for people to recognize the space. It is necessary to meet the requirements of use, use, and use, and at the same time create a comfortable room, interior light, environment, and environment. The recommended brightness ratio control values u200bu200bfor the office are shown in Table 1. The value-attention-meaning is that the recommended brightness ratio in Table 1 is the smallest value, and the actual lighting *bright setting-time should be controlled within this value range. Of course, the brightness of the room is too uniform, it will also make the space look dull, which is not conducive to the construction of the room * the space-atmosphere-surrounding. In order to obtain a suitable brightness ratio, the recommended values u200bu200bof reflectance of the office indoor surface are shown in Table 2.
Urban lighting lighting engineering company lighting factory people think that a small amount of bright colors can appear in the office environment, its reflectance should be relatively low, and the area should usually be controlled below 10% of the population, which can be used for illumination* Ming has both heavy-point and multi-species, but it should avoid large areas of saturated colors in the visual field.
People in the lighting factory of urban lighting lighting engineering company believe that a bright office environment can improve people's office efficiency, work enthusiasm and interest. The brightness of the office mainly depends on the size and distribution of the indoor brightness, of course, it also has a lot to do with the color change of the indoor surface. The size and distribution of the room-internal brightness can be adjusted by the brightness-degree of the lamp-tool, the distribution-distribution of the lamp-tool, and the reflection-reflection-ratio of different surfaces.
The people in the lighting factory of the urban lighting lighting engineering company believe that the change of indoor brightness is the prerequisite for people to recognize the space. It is necessary to meet the requirements of use, use, and use, and at the same time create a comfortable room, interior light, environment, and environment. The recommended brightness ratio control values u200bu200bfor the office are shown in Table 1. The value-attention-meaning is that the recommended brightness ratio in Table 1 is the smallest value, and the actual lighting *bright setting-time should be controlled within this value range. Of course, the brightness of the room is too uniform, it will also make the space look dull, which is not conducive to the construction of the room * the space-atmosphere-surrounding. In order to obtain a suitable brightness ratio, the recommended values u200bu200bof reflectance of the office indoor surface are shown in Table 2.
Urban lighting lighting engineering company lighting factory people think that a small amount of bright colors can appear in the office environment, its reflectance should be relatively low, and the area should usually be controlled below 10% of the population, which can be used for illumination* Ming has both heavy-point and multi-species, but it should avoid large areas of saturated colors in the visual field.
Custom message
