Six advantages of using LED lights you should know

by:EME LIGHTING     2021-03-22
1. Small size
LED is basically a small chip encapsulated in epoxy resin, so it is very small and very light.
Two, low power consumption
LED power consumption is quite low, generally speaking, the working voltage of LED is 2-3.6V. The working current is 0.02-0.03A. This means: it consumes no more than 0.1W of electrical energy. The luminous visual efficiency rate can be as high as 80lm/w, a variety of LED lamp color temperatures are optional, the color rendering index is high, and the color rendering is good; it is obvious that as long as the cost of the LED lamp decreases with the continuous improvement of LED technology. Energy-saving lamps and incandescent lamps will inevitably be replaced by LED lamps.









Three, long service life
Under the right current and voltage, the service life of LED can reach 100,000 hours, which can be said to be once and for all for ordinary household lighting.
Four, high brightness, low heat
LED uses luminescence technology, working under low thermal voltage, safe and reliable. The surface temperature is less than or equal to 60°C (at ambient temperature Tau003d25°C); the calorific value is much lower than that of ordinary lighting fixtures.
Five, environmental protection
LED is made of non-toxic materials, no harmful substances of mercury. Unlike fluorescent lamps that can cause pollution due to mercury, the assembly parts of LED bulbs can be easily disassembled, and they can be recycled by others without being recycled by the manufacturer; and the energy consumption of white light LEDs is only 1/of that of incandescent lamps. 10. 1/4 of energy-saving lamps. The country pays more and more attention to lighting energy saving and environmental protection issues, and has been vigorously promoting the use of LED lamps.









Six, strong and durable
LED is completely encapsulated in epoxy resin, which is stronger than light bulbs and fluorescent tubes. There is no loose part in the lamp body, these characteristics make the LED can be said to be difficult to damage. LED lights are highly energy-saving: energy-saving energy is environmentally friendly without pollution. DC drive, ultra-low power consumption (0.03-0.06 watts per tube) electro-optical power conversion is close to 100%, the same lighting effect is more than 80% energy-saving than traditional light sources.
Long life: LED light source is called long-life lamp, which means a lamp that never goes out. Solid cold light source, epoxy resin encapsulation, there is no loose part in the lamp body, there are no shortcomings of filament light, easy to burn, thermal deposition, light decay, etc. The service life can reach 60,000 to 100,000 hours, which is 10 times longer than the life of traditional light sources. the above.
Changeable: LED light source can use the principle of red, green and blue three primary colors, under the control of computer technology, make the three colors have 256 gray levels and mix them arbitrarily, which can produce 256×256×256u003d16777216 colors. It forms a variety of combinations of different light colors and realizes colorful dynamic changes and various images.
Environmental protection: better environmental benefits, no ultraviolet and infrared in the spectrum, no heat, no radiation, little glare, and recyclable waste, no pollution, no mercury element, cold light source, safe to touch, belong Typical green lighting source.
Gao Xinjian: Compared with the monotonous luminous effect of traditional light sources, LED light sources are low-voltage microelectronics products, which successfully integrate computer technology, network communication technology, image processing technology, embedded control technology, etc., so it is also digital information. The product is the 'high-tech tip' technology of semiconductor optoelectronic devices, with the characteristics of online programming, unlimited upgrades, and flexibility.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...