Shaoguan imported lamp beads 2835LED lamp with consultation

LED light strips are a major artifact of indirect lighting, which are very common in hotels, high-end shopping malls and home lighting applications. Seeing the light but not the light is our most vivid understanding of LED strips. Imported lamp bead 2835LED lamp with LED2835 0.2w attached lamp with board, when the whole board is tested, it does not light up for a few lessons, and there are two possibilities for a single test to light up. The first is that the local lamp bead connection line on the light board is open; The second is that the lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the whole board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. Since the light strip is installed in a hidden way, the light source is not exposed, which can effectively reduce the discomfort caused by glare. Therefore, LED light strips are widely used in various commercial spaces and home lighting. 5630LED lamp with double row highlighting 180 beads, ceiling outdoor waterproof lamp for living room ceiling. Imported lamp beads 2835 LED lamp strip LED lamp strips commonly used models are 3528 and 5050. Therefore, whether you can buy a good chip, in addition to whether you can pay a good price when you buy it yourself, you also need the manufacturer's integrity. Generally speaking, European, American and Japanese chips are better than Taiwanese chips, and Taiwanese chips are better than domestic ones. But the price is also higher than one. Sometimes I am really 'proud': There is really no shortage of cutting-edge talents in China. The new 5630 light strip, imported Korean Samsung light source, suitable for high-end clubs, villas, luxury home decoration, outdoor lighting, pure copper wire. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. The UK has innovatively developed high heat dissipation circuit boards. Imported lamp beads 2835LED lamp belt 2835led lamp belt power is about 15W, LED lamp belt uses FPC as assembly circuit board, and uses SMD LED for assembly, making the product thickness only the thickness of a coin , The general specifications are 30cm long 18 LEDs, 24 LEDs and 50cm long 15 LEDs, 24 LEDs, 30 LEDs and so on. There are also 60cm, 80cm, etc. It can be cut and extended arbitrarily without affecting the luminescence. The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.