Qingyuan High Bright 2835 LED Strip Consultation

In fact, people without relevant knowledge and experience are easily deceived and buy low-quality light strips. However, experienced people still have a way to identify, the LED light strips produced by regular manufacturers and the LED light strips of cottages can be seen at a glance from the appearance. High-brightness 2835 LED strips The regular LED strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static moisture-proof packaging bags on the outside. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. The following Shenzhen Lighting Factory introduced us to the identification techniques of the quality of LED light strips, to see how to identify the quality of LED light strips by eyes. When it comes to LEDs, energy saving is naturally its due. High-brightness 2835 LED lights with LED lights are usually high voltage 220V, so they are wrapped with a thick layer of flame retardant glue. Wires, circuit boards, etc. are generally made of copper. LED lights determine the life of the lights. For the sake of safety in electricity use, you must not choose inferior quality products just because the price is cheap, which may be a safety hazard in exchange. For LED light strips, the importance of light efficiency has a lot to do with its application scenarios. The requirements for light efficiency are relatively low when applied to large-area luminous ceilings or showcases. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. Only those who are kind to life will be treated kindly. The SMD5050 used in the high-brightness 2835 LED strip light strip is packaged with Taiwanese high-brightness chips, and the luminous flux is 1-2lm higher than ordinary chips. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. Choose lighting factory light strips, arrange smart light strips and LED light strip controllers, and bid farewell to the dazzling ceiling lights. Every night, when you sit up from the bed, it will automatically light up and take care of you and me tenderly!