Qingyuan 3528 led light belt cost

LED light strips are a major artifact of indirect lighting, which are very common in hotels, high-end shopping malls and home lighting applications. Seeing the light but not the light is our most vivid understanding of LED strips. 3528led light strip installation light strip first cut according to the required length, take out the right amount of light strip, and then directly insert the side of the light strip with no patch position against the thread pin, when the thread pin is connected to the plug, the plug can be plugged in. Powered up and used. In this process, it should be noted that the access point must be checked repeatedly to avoid leakage of water. Since the light strip is installed in a hidden way, the light source is not exposed, which can effectively reduce the discomfort caused by glare. Therefore, LED light strips are widely used in various commercial spaces and home lighting. The ED light strip is mainly installed in the light trough to create a large area of u200bu200bluminous ceilings and walls. The 3528led light strip is packaged. Regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside. The counterfeit version of the LED light strip will use recycled reel for cost saving, and there is no anti-static and moisture-proof packaging bag. If you look closely at the reel, you can see that there are traces and scratches left by the label when the label is removed. The effect of this is precisely because of its large lighting range, so once a problem occurs, it will affect a wide range of light and shadow effects. When choosing LED strips, we must keep our eyes open and choose carefully. Therefore, lighting is not just a flick of a light switch, lighting can embed emotion, attitude and vitality into any environment. Wrong lighting may destroy the aesthetics of the design and have a negative impact on the user. 3528led light strips depends on the quality of the FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, it will also cause the pad to fall off, which is counterproductive. Good lighting can make all the elements in the space coexist harmoniously, and the led light strip is one of them. Important regulator.