Only knowing these 5 points can you know the lighting.

Lighting is a new type of energy-saving lighting lamp that can replace the third-generation lighting source. This lamp can be said to belong to the new fourth-generation lighting energy-saving lamp along with LED lights. Although many people know LED lights, they know very little about lighting. Some people don’t even know what lamp is? For lighting, if you know the following 5 points, then you can really know what kind of light the lighting is. Must know 1: It is an electromagnetic induction lamp. This point is based on the light-emitting principle of lighting. Ordinary lighting lamps rely on positive and negative electrodes to conduct and excite phosphors to emit light, or rely on filament heating to emit light. However, the lighting is not only an internal coupling type, but also an external coupling type, all relying on the 'electromagnetic field' to stimulate the phosphor to emit light. Must know point 2: It is a long-life lamp. This point is from the characteristics of the lighting. Since the lighting relies on electromagnetic induction to excite the phosphor to emit light, there is no filament or electrode that limits the life of the lamp. From this point of view, the life of the lighting is relative to other lighting , The service life is very long, theoretically, it can reach 60,000 hours of service life. Must know point 3: It is a kind of high energy-saving lamp. This point is from the lighting effect of the lighting. After the lighting is lit, the light is close to the natural daylight color, soft and high in color rendering. Compared with ordinary lighting, the visual effect is better. Lighting can replace ordinary lighting with more than nearly 1 times the power. For example, 100W lighting can replace 200W high-pressure sodium lamps. The lighting effect is better than high-pressure sodium lamps, but it can also save 50% of electricity consumption! Must know point 4: It is a kind of light without blue light hazard. This point is from the light spectrum of lighting. The phosphor used in lighting is three primary color phosphors. After the production process is coated, it is detected with a spectrum analyzer. The three types of lights are evenly distributed, and the blue light is significantly lower than the green light. With the red light, the color after the combination is soft and does not hurt the eyes, so it is said that the lighting is a kind of light without the harm of blue light. Must know point 5: It is a kind of light without flicker. This point is based on the working frequency of lighting. The working frequency of lighting is divided into two types: one is low-frequency lighting, the working frequency is generally around 200KHz; the other is high-frequency lighting, the working frequency is generally around 2.6MHz. The working frequency of general general lighting is 50-60Hz. (Note: 1KHzu003d1000Hz; 1MHzu003d1000KHz) Therefore, whether it is low-frequency or high-frequency lighting, the lighting operating frequency of the lamp is far greater than the operating frequency of ordinary lighting on the market. Therefore, the lighting is a kind of non-flashing lamp. In summary, if you understand lighting, if you know that lighting is an electromagnetic induction lamp, it is a long-life lamp; it is also a high-energy-saving lamp, and it is also a kind of light without blue light hazard, and it is also a kind of frequency-free lamp. Flashing lights. The lighting factory has been committed to the research and development, production and sales of energy-saving, environmentally friendly and healthy lighting for 17 years, hoping to make brighter, more energy-saving and healthier lighting to benefit more users.