Maoming LED lights with customization

Nowadays, the color temperature of LED light strips is very large. Color temperature is a professional concept. LED lights with LED light strips are generally high-voltage 220V. Therefore, they are wrapped with a thick layer of flame-retardant glue. Wires, circuit boards, etc. are generally used The use of copper and LED lamp beads determines the life of the light strip. For the sake of electricity safety, you must not choose inferior quality because of the low price. If you are greedy for temporary cheapness, it may be a safety hazard! Of course, it is not ruled out that you can find good quality and cheap prices, but such an opportunity does not fall out of thin air. Simply put, it is the color of light. In terms of white light, the color temperature is generally expressed in thousands of digits. The smaller the number, the yellower and redder the color, the larger the number, the whiter, and the more blue. The unit is expressed by K. General light strip products provide 3000K and 4000K color temperature for selection. LED light strips are divided into colors. LED lights have 'colorfulTheoretically, LEDs can call out many colors, but these are the mainstream ones. Shipments are 'warm whiteThere are very few other colors. If you want a sense of warmth, choose 'warm white'; if you want a sense of lightness, choose 'cool white'; if you want a sense of fashion, choose 'blue'. Bull LED strip products are available in 3 color temperatures, 3000K, 4000K and 5700K. Hotels, high-end shopping malls and home furnishings can choose a low color temperature below 3000K to create a warm atmosphere; the office can choose a cold light source with a higher color temperature. How to see the consistency of light color? You can find a piece of white paper, vertically close to the LED light-emitting surface, carefully observe the light and shadow on the white paper, LED2835 0.2w attached to the light and board, when the whole board is tested, there are a few lessons that do not light up, there are two possibilities for a single test piece to light up. , The first is that the local lamp bead connection circuit on the lamp board is open; the second is that the lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the entire board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. The LED light strip can judge whether the light color is the same. Isn't it simple?