Maoming led light strip design

When decorating, you will usually see LED strips in the decoration list, but most owners don’t know what it is. Features of LED strips: 1. Low energy consumption and energy saving: The power consumption is just ordinary rice bulbs. 1/10. The power per meter is 3 watts; 2. High safety: high electro-optical conversion rate, close to 100%, low heat generation, no fire hazard; 3. Long life: under normal working conditions, the life span can reach 80,000 hours, up to 5 Years; 4. Strong plasticity: easy to bend and design a variety of shapes to achieve a variety of decorative effects; waterproof, outdoor and indoor can be used; collision resistance, maintenance-free lamps. In fact, this is normal for the led light strip. One is that there is not much contact, and the other is that the light strip is hidden. We only see its light but not its figure. A comprehensive high-tech enterprise with LED lights with light bars as its core products. LED lights with LED lights with the commonly used models are 3528 and 5050. Therefore, whether you can buy a good chip, in addition to whether you can pay a good price when you buy it yourself, you also need the manufacturer's integrity. Generally speaking, European, American and Japanese chips are better than Taiwanese chips, and Taiwanese chips are better than domestic ones. But the price is also higher than one. Sometimes I am really 'proud': There is really no shortage of cutting-edge talents in China. We focus on various types of LED high-voltage light strips, low-voltage light strips, 5050, 2835, 5730, 3014 and other products. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether it is necessary to have a sheath. The led lamp with LED2835 0.2w is attached to the lamp with board. During the whole board test, there are several lessons that do not turn on. There are two possibilities for a single test to turn on. One is that the local lamp bead connection line on the lamp board is open; the second is that the lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the whole board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. So we must understand the product, understand the application place, understand the demand, and choose the right product.