Maoming flexible 5630led light strip manufacturer

The led strip can conceal the beam on the top of the living room, achieving the effect of killing two birds with one stone. In order to make the ceiling decoration more warm, the led strip has become an indispensable decoration item. What about the lighting effect of the led strip? The SMD5050 used in the flexible 5630led strip strip is packaged with Taiwan's high-brightness chip, and the luminous flux is required. 1-2lm higher than ordinary chips. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. How to choose and install led light strips. Today, Shenzhen Lighting Factory will answer you one by one. For good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light emission is uniform, and the brightness of the lamp strip should be consistent. Flexible 5630led strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, 5050 refers to the length and width of the LED light source are 50mm), the difference between the two On the one hand, the size is different. On the other hand, there are 3 LED chips in the 5050 lamp bead. Therefore, the brightness of the 5050 LED lamp is 3 times that of the 3528 LED lamp with the same number of lamp beads. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. Only those who are kind to life will be treated kindly by life. The number of beads per meter of flexible 5630led light strip LED light strip is fixed. 1210 is 60 lights, 5050 is 30 lights. If there are special requirements, if there are 50 lights per meter, it is necessary to modify the circuit. Usually it is a group of 3 LEDs. If it is 50 lamps, there will be a group of insufficient quantity, but if it becomes a group of two LEDs, the resistance of the current-limiting resistor will be increased, which will cause a waste of resources. Therefore, when customizing LED strips, be sure to pay attention to the number of lamp beads is a multiple of 3, choose lighting factory strips, arrange smart strips and LED strip controllers, and bid farewell to the dazzling ceiling lights. Every night, when you sit up from the bed, it will automatically light up and take care of you and me tenderly!