Maoming 5630 led strip production

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or strip-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light. Named from the light belt. It is very important to choose a shape of the 5630led light strip. We must know that this beautiful shape and generous size are also very good. Then it is the choice of the chip. The choice of the chip is very important. We generally choose imported ones. Chip-based, such as SMD2835 lampshade, generally we choose PVC lampshade is suitable, some lampshades are very easy to break, so don't buy the lamp strip selection skills and decoration effect in the decoration process. Using a very soft PCB board with a thickness of 2MM as the substrate, the quality of the 5630led light strip depends on the quality of the FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off, and if the temperature is too high during maintenance, the pad will fall off and it will be easy to install and fix. Flexible and convenient cutting makes construction and operation convenient, ultra-thin design, low-temperature light source, so that the selection and matching of auxiliary materials during the product installation process is more flexible. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. The UK has innovated and developed high heat dissipation circuit boards. The specifications of 5630led strips are different. You must pay attention to the selection. The specifications mainly refer to the number of lamp beads per meter. For example, 72 means 72 lamp beads per meter. Choose according to your needs and hobbies. The 1210 specification light strip has 60 LEDs per meter, the 5050 specification light strip has 30 LEDs per meter, and the special one has 60 LEDs per meter. The price of LED light strips of different specifications is different. This is also an important factor to distinguish the price of LED light strips. Compared with the traditional light strips, the luminous flux of the leadless LED light strips is increased by more than 100%, and the energy-saving effect is increased by 100%-200%. LED light strips are truly energy-saving and bright, becoming ultra-high-brightness lighting grade light strips.