Is your all-Copper Solder lamp installed like this?

Matters needing attention in the installation of all-Copper Solder chandeliers: the installation of all-Copper Solder chandeliers is different from that of ordinary chandeliers, because the lamps are made of all-copper materials, pay attention to the weight comparison of lamps, in order to ensure the safety of its subsequent use, the factors to be considered in the installation process are different. 1. If there are multiple chandeliers during installation, attention should be paid to their position and length, for example, when some living rooms and restaurants are connected together for decoration, many people like to install a full copper chandelier in the living room and the dining room respectively, so we must pay attention to the position and installation height of the two during the installation process. 2. During the installation process, the expansion screw must be tightened to ensure the installation stability of the entire chandelier, and it is determined that there will be no sag during future use. 3. During the installation of all-Copper Solder chandelier, it should be noted that the hanger Rod should have a certain length of thread for height adjustment. The light box under the hanger Rod should be suspended, and the reliability of connection should be paid attention. 4. When packaging, the chandeliers and semi-chandeliers of each snooker house will be distributed for one meter free of charge, or the appropriate length of the chain will be provided according to the height of the lighting space placed by the customer, thus reflecting the beauty of the chandelier, giving people a visual enjoyment. The following is answered by snooker Meiju. Preparations for the installation of all-copper chandeliers: 1. Preparation of installation materials: the main materials used in the installation process are wood, aluminum alloy, steel, etc, these are mainly used as supporting components of chandeliers; However, plastics, plexiglass plates, electrochemical aluminum plates, etc. are mainly used for decorative parts, and some accessories such: screws, nails, rivets, finished lamps, adhesives, etc. Snooker Meiju lamps will provide all-round decoration guidelines, decoration design knowledge and matters needing attention in the lamp packaging! 2. Preparation of installation tools: the main tools used in the installation process of all-copper chandelier include pliers, screwdriver, hammer, electric jig saw, electric hammer, handwheel, ruler, paint brush, etc. Connection of structural layers when installing all-Copper Solder chandeliers: This is mainly to consider the connection between embedded parts and transition parts. In the process of operation, iron parts or wooden bricks (Except for water brick bearing). The embedding position should be accurate and there should be enough room for adjustment; Then, a transitional connecting piece is set on the iron piece and the wooden brick so as to adjust the error of the piece, which can be nailed, welded and screwed through with the piece; Finally, connect the boom, sling and transition connector. Snooker Meiju lamps will provide all-round decoration guidelines, decoration design knowledge and matters needing attention in the lamp packaging! Snooker beauty tips: install lamps, safety first!