Guangzhou LED light belt consultation

LED (Light Emitting Diode, abbreviated as LED, the Chinese name is light-emitting diode.) Light strip refers to the assembly of LEDs on a ribbon-shaped FPC (flexible circuit board) or PCB hard board. In terms of lighting quality, because the LED is cast Light lamps have no heat, ultraviolet and infrared radiation, and will not harm exhibits or commodities. Compared with traditional light sources, lamps do not require additional filtering equipment. The lighting system is simple, low-cost, and easy to install. Its precise lighting can be used as a substitute for optical fiber lighting in museums. The LED light strip is named after its product shape is like a belt. Because of its long service life (generally 80 to 100,000 hours) and environmental protection, ED light strips have gradually emerged in various decoration industries. ED light strips are mainly installed in light troughs to create large-area luminous ceilings and walls. LED light strips look The cleanliness of the surface of the LED light strip If the LED light strip produced by the SMT process is used, the surface cleanliness is very good, and there are no impurities and stains. However, if the counterfeit LED strip is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC. Shaping the effect of wall washing, it is precisely because of its large lighting range, so once a problem occurs, it will affect a wide range of light and shadow effects. When choosing LED strips, we must keep our eyes open and choose carefully. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether it needs to have a sheath. The specifications of LED lights are different. You must pay attention to the selection. The specifications mainly refer to the number of lamp beads per meter. It is 72 lamp beads per meter, you can choose according to your needs and hobbies. The 1210 specification light strip has 60 LEDs per meter, the 5050 specification light strip has 30 LEDs per meter, and the special one has 60 LEDs per meter. The price of different specifications of LED light strips is different, which is also an important factor to distinguish the price of LED light strips. Don't just see the advantages of the protective cover, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.