Guangdong Waterproof High Voltage 2835 LED Strip Design

When it comes to LED light strips, some owners may be very unfamiliar. Although some owners know but only know LED lights, they may not be familiar with other specific conditions. Waterproof high-pressure 2835LED light strip depends on the quality of FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, it will also cause the pad to fall off. Today, I will borrow the information from the Shenzhen Lighting Factory Decoration Company to introduce you to one of the LED lights — —Classification of LED strips. Let's take a closer look now! When it comes to LEDs, energy saving is naturally its due. Look at the cleanliness of the surface of the waterproof high-pressure 2835LED strip. If the LED strip is produced by the SMT process, the cleanliness of the surface is very good, and no impurities and stains can be seen. However, if the counterfeit LED strip is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC. For LED light strips, the importance of light efficiency has a lot to do with its application scenarios. The requirements for light efficiency are relatively low when applied to large-area luminous ceilings or showcases. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. LED is a semiconductor light-emitting diode. LED energy-saving lamps use high-brightness white light-emitting diodes to emit light. It has high light efficiency, low power consumption, long life, easy control, maintenance-free, safe and environmentally friendly; waterproof and high-pressure 2835 LED lights with regular LED lights. It is packaged in an anti-static coil material tray, usually 5 meters per roll or 10 meters per roll, and then sealed with an anti-static moisture-proof packaging bag on the outside. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. It is a new generation of solid cold light source, with soft light color, gorgeous, colorful, low loss, low energy consumption, green and environmental protection, suitable for households, shopping malls, banks, hospitals, hotels, restaurants and other public places for long-term lighting.