Guangdong No Dark Zone 3014LED Light with Consultation Hotline

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. No dark zone 3014LED light strip LED light strip is generally 100 meters in a roll. When purchasing, you should tell the seller in advance and usually cut it out for you according to the length you need and how much you order. You need to use several sections at home, each section is equipped with a connector, just plug it directly into the socket. If you want to cut it yourself, you need to pay attention. The light strip will usually be marked with a special scissors mouth, cut it at the scissors mouth, connect it, and you can use it. Remember: be sure to cut according to the instructions, otherwise it will cause no light! Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. 5630LED lamp with double row highlighting 180 beads, ceiling outdoor waterproof lamp for living room ceiling. No dark zone 3014LED light strip 2835led light strip power is about 15W, LED light strip is assembled with FPC circuit board, assembled with SMD LED, so that the thickness of the product is only the thickness of a coin. The general specification is 30cm long and 18 pcs. LED, 24 LEDs and 50cm long 15 LEDs, 24 LEDs, 30 LEDs, etc. There are also 60cm, 80cm, etc. It can be cut and extended arbitrarily without affecting the luminescence. The new 5630 light strip, imported Korean Samsung light source, suitable for high-end clubs, villas, luxury home decoration, outdoor lighting, pure copper wire. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether there will be dust accumulation, need to have a sheath, no dark area 3014LED lights when LED lights are used for interior decoration, the back of each LED lights are pasted with self-adhesive 3M double-sided tape, installation At this time, you can directly tear off the sticker on the surface of the 3M double-sided adhesive, and then fix the light bar to the place where you need to install it and press it flat by hand. As for some places that require corners or are long, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used individually. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.