Guangdong LED strip manufacturer

Decorating a house is a painstaking task. How to outline the space curve to the utmost extent and achieve the perfect fusion of space and light is an important part of decorating a house. The quality of the FPC depends on the LED lights. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, it will also cause the pad to fall off. Many people have worked hard to choose the living room chandelier when installing the house, but they neglected the decoration of the LED strip , Choosing a good LED light strip can play a finishing touch. So how to select and lay out LED strips? LED light strips need to be driven by a power source. LED light strips are generally high-voltage 220V, so they are wrapped with a thick layer of flame retardant glue. Wires, circuit boards, etc. are generally made of copper, LED lamp beads Determines the life of the light strip. For the sake of electricity safety, you must not choose inferior quality because of the low price. If you are greedy for temporary cheapness, it may be a safety hazard! Of course, it is not ruled out that you can find good quality and cheap prices, but such an opportunity does not fall out of thin air! When the voltage drop of the LED drive power is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strips, and compare them side by side, observe with your eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. LED light strips are generally 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires and circuit boards are generally made of copper. LED light beads determine the life of the light strip. LED light strips are a regular manufacturer of LED light strips. The LED strips produced are produced using SMT chip technology, solder paste and reflow soldering processes. Therefore, the solder joints on the LED light strip are relatively smooth and the amount of solder is not too much. The solder joints extend from the FPC pad to the LED electrode in a circular arc shape. However, the amount of solder in the solder joints of the counterfeit version of the LED light strip is uneven, and most of the solder feet are covered by a dot, and at the same time there will be different degrees of tin tips, which is a typical phenomenon of manual soldering. For the sake of electricity safety, you must not use inferior quality products. If you are greedy for a while, you may get a safety hazard!