Guangdong Gaoliang 2835 LED Strip Manufacturer

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. The high-brightness 2835 LED light strip light strip can not be used as the main lighting, but only plays an auxiliary role. However, as people’s requirements for residential quality are getting higher and higher, many designers will choose to use the light strip design in the space design. Improve the quality of the space, and the design of the light strip is more novel and beautiful. The surface that people look at most directly in the space is the wall. Add a light strip to the background wall of the living room or bedroom, and the soft light tube can give the space a calm and introverted temperament. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. The ED light strip is mainly installed in the lamp trough to create a large area of u200bu200bluminous ceilings and walls. The high-brightness 2835 LED light strip will be packaged in an anti-static coil, usually 5 meters per roll or 10 meters per roll. , And then seal the outside with an anti-static and moisture-proof packaging bag. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. Shaping the effect of wall washing, it is precisely because of its large lighting range, so once a problem occurs, it will affect a wide range of light and shadow effects. When choosing LED strips, we must keep our eyes open and choose carefully. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether it is necessary to have a sheath. The high-brightness 2835 LED light strip is installed. The light strip is first cut according to the required length. Take out the appropriate amount of light strips, and then directly place the no patch position on the needle Insert one side of the light strip, when the wire pin is connected to the plug, the plug can be energized for use. In this process, it should be noted that the access point must be checked repeatedly to avoid leakage of water. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. So we must understand the product, understand the application place, understand the demand, and choose the right product.