Guangdong Gaoliang 2835 LED Strip Design

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or strip-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light, because its shape is like a strip when it emits light Named from the light belt. Highlight 2835 LED lights with LED lights features: 1, low energy consumption, energy saving: power consumption is only 1/10 of the ordinary rice bulb. The power per meter is 3 watts; 2. High safety: high electro-optical conversion rate, close to 100%, low heat generation, no fire hazard; 3. Long life: under normal working conditions, the life span can reach 80,000 hours, up to 5 Years; 4. Strong plasticity: easy to bend and design a variety of shapes to achieve a variety of decorative effects; waterproof, can be used outdoors and indoors; collision-resistant, maintenance-free lamps. During the decoration process, the lamp belt selection skills and the decoration effect are introduced. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. High-brightness 2835 LED strips The regular LED strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static moisture-proof packaging bags on the outside. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. LED is a semiconductor light-emitting diode. LED energy-saving lamps use high-brightness white light-emitting diodes, which have high luminous efficiency, low power consumption, long life, easy control, maintenance-free, safe and environmentally friendly; high-brightness 2835 LED strips are required for LED strips When connected and used, how long each type of light strip can be connected has a lot to do with the width of the circuit and the thickness of the copper foil during design. Because the current intensity per unit area is related to the cross-sectional area of u200bu200bthe line, if this is not considered when wiring, then when the connection length exceeds the current that the line can withstand, the light strip will heat up due to overcurrent. While damaging the circuit board, it also reduces the service life of the led. It is a new generation of solid cold light source, with soft, bright, colorful, low loss, low energy consumption, green and environmental protection, suitable for families, shopping malls, banks, hospitals, hotels, restaurants He illuminates all kinds of public places for a long time.