Guangdong constant current 2835led light strip manufacturer

LED light strips are a major artifact of indirect lighting, which are very common in hotels, high-end shopping malls and home lighting applications. Seeing the light but not the light is our most vivid understanding of LED strips. Constant current 2835led light strip LED light strip is generally 100 meters in a roll. When purchasing, you should tell the seller in advance and usually cut it out for you according to the length you need and how much you order. You need to use several sections at home, each section is equipped with a connector, just plug it directly into the socket. If you want to cut it yourself, you need to pay attention. The light strip will usually be marked with a special scissors mouth, cut it at the scissors mouth, connect it, and you can use it. Remember: be sure to cut according to the instructions, otherwise it will cause no light! Since the light strip is installed in a hidden way, the light source is not exposed, which can effectively reduce the discomfort caused by glare. Therefore, LED light strips are widely used in various commercial spaces and home lighting. 5630LED lamp with double row highlighting 180 beads, ceiling outdoor waterproof lamp for living room ceiling. Constant current 2835led strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, and 5050 refers to the length and width of the LED light source is 50mm) The difference is that the size is different on the one hand, and on the other hand, there are 3 LED chips in the 5050 lamp beads, so under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED lamp strip. The new 5630 light strip, imported Korean Samsung light source, suitable for high-end clubs, villas, luxury home decoration, outdoor lighting, pure copper wire. At present, the application range of LED light strips is wide, and the number of lamp beads per meter of constant current 2835led light strips is fixed. 1210 is 60 lights, 5050 is 30 lights. If there are special requirements, if there are 50 lights per meter, it is necessary to modify the circuit. Usually it is a group of 3 LEDs. If it is 50 lamps, there will be a group of insufficient quantity, but if it becomes a group of two LEDs, the resistance of the current-limiting resistor will be increased, which will cause a waste of resources. Therefore, when customizing LED light strips, be sure to note that the number of lamp beads is a multiple of 3 and is no longer limited to the previous interior decoration, street scene decoration and other places. In the future, the use of led strips will be further expanded.