Chaozhou LED Strip Factory
by：EME LIGHTING
2021-03-22
With the development of the LED industry, the functions of LED soft lights with environmental protection, small size, and high reliability have gradually become prominent from other aspects. LED light strips LED light strips are generally designed at home in the top, wall, or ground-shaped groove. The light is always blocked and projected and reflected to see good results. Therefore, the effect of the LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. Achieving unique light and shadow effects can bring you a unique visual experience.
In places where electricity costs are high and use time is long, sensitive LED soft light belts have become the new favorite of shopping malls. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. LED strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, 5050 refers to the length and width of the LED light source are 50mm), the difference between the two is one On the one hand, the size is different. On the other hand, there are 3 LED chips in the 5050 lamp beads, so under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED strip. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. The UK has innovated and developed high heat dissipation circuit boards. In terms of lighting quality, LED light strips have no heat, ultraviolet and infrared radiation, and will not cause harm to exhibits or commodities. Compared with traditional light sources, lamps do not require additional filtering. The equipment and lighting system are simple, low-cost, and easy to install. Its precise lighting can be used as a substitute for optical fiber lighting in museums. The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.
In places where electricity costs are high and use time is long, sensitive LED soft light belts have become the new favorite of shopping malls. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. LED strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, 5050 refers to the length and width of the LED light source are 50mm), the difference between the two is one On the one hand, the size is different. On the other hand, there are 3 LED chips in the 5050 lamp beads, so under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED strip. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. The UK has innovated and developed high heat dissipation circuit boards. In terms of lighting quality, LED light strips have no heat, ultraviolet and infrared radiation, and will not cause harm to exhibits or commodities. Compared with traditional light sources, lamps do not require additional filtering. The equipment and lighting system are simple, low-cost, and easy to install. Its precise lighting can be used as a substitute for optical fiber lighting in museums. The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.
Custom message
