Chaozhou 2835led light strip customization

The led strip can conceal the beam on the top of the living room, achieving the effect of killing two birds with one stone. In order to make the ceiling decoration more warm, led light strips have become an indispensable decoration item. What about the lighting effect of the led light strips? 2835led light strips install the light strips first according to the required length to cut out the right amount of light strips, and then Directly insert the side of the light strip with no patch position facing the thread needle, and when the thread needle is connected to the plug, the plug can be energized for use. In this process, it should be noted that the access point must be checked repeatedly to avoid leakage of water. How to choose and install led light strips. Today, Shenzhen Lighting Factory will answer you one by one. First of all, we must know that the light strip can only play an embellishment role. The 2835led light strip LED rigid light strip is assembled with PCB (printed circuit board) hard board, LED can be assembled with SMD LED, and it is also useful for in-line LED For assembling, different components are used according to different needs. The advantage of the rigid light bar is that it is easier to fix, and it is more convenient to process and install; the disadvantage is that it cannot be bent at will and is not suitable for irregular places. For the color, you can choose warm white or RGB multi-color, RGBWC5 color, because the main function of the light strip is to embellish, so it is recommended to use warm white, so that the effect of the living room and dining room will be more warm, and it will be aesthetically fatigued after a long time. . In festivals, PARTY and other scenes, consider using RGBWC to meet the needs of all seasons. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. British innovative research and development of high heat dissipation circuit board, 2835led light strip
Cut light strip
The LED light strip is a circuit structure composed of 3/6 LEDs in series and parallel, and every 3 LEDs can be cut and used individually.
The cutting method of the light strip is that the blank space of every 3 or 6 lights on the light strip is a cutting place. If you cut it in other places, it will damage the circuit of this section of the light strip and cause the light strip to be damaged. .
The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.