pendants different knots for tying pendants on a leather-corded ...

Pendants are at the heart of different necklace designs.It usually consists of a large bead or hanging feature.Depending on the style of the necklace you made, you can attach the pendant to the leather rope with different knots.The best knot depends on how the pendant will hang on the necklace.If you use beads, you should make sure that the holes on the beads are large enough that the leather rope can be worn through.The get-started knot is a simple knot that can be used to fix the hanging pendant in the center of the necklace so that it does not slide around.Twist the pendant onto the leather rope and place it in the center of the rope.Make a circle on the rope on one side of the pendant.Pass the loose end of that side into the ring and tighten the knot.Repeat this on the rope on the other side of the pendant to make sure it is in place.The bow knot creates a ring on the leather rope from which you can hang the pendant.Twist the pendant onto the leather rope and place it in the center of the rope.Make a circle on the rope on one side of the pendant.Pass the loose end of the rope through the ring from the other side of the pendant, wrap around the neck, and return to the ring.Tighten the knot to ensure the pendant is in place.This pendant is suitable for holes in the front.Make a fold in the center of the leather rope.Fill the folds by the back of the hole on the pendant.Pull the ring at the end of the pendant and circle around the back.Tighten both ends of the leather rope and secure the pendant on the rope.This is ideal for connecting stones to necklaces without additional support.Make a circle in the center of the leather rope.Wrap the right end of the leather rope to the left, weave underneath, and then weave underneath.End of passing down under the loop created in thong and the original loop.Pass the left end of thong to the original loop and the loop created.Wrap the left end around the right end and weave it down again.End of passing down under the loop created in thong and the original loop.When the stone is set, make a small cut on the inner edge of the loop.Insert the stone into the ring and tighten the knot.Use the glue of the Shoemaker to strengthen the grip.