Structure and installation skills of living room ceiling lamp

All-copper ceiling lamp structure: All-copper ceiling lamp is mainly composed of hanging plate, ceiling Cup, glass bottom cover, bowl holder, beauty, lamp Cup, etc. Before installation, please check whether the accessories of the all-copper ceiling lamp are complete according to the installation instructions before installation. Installation skills of all-copper ceiling lamp: when installing all-copper ceiling lamp, pay attention to the unreliable bulb when installing the bulb. The glass side cover is too close, at least 2 cm, to avoid dark areas. Step 1: fix the hanging plate of the all-copper ceiling lamp on the ceiling. If your ceiling is cement board, please fix it with expanded screw, if it is wood structure ceiling, please use wood screw, if the ceiling is gypsum board and other materials that cannot fix screw, please contact your decorator to put a wooden square in the ceiling in advance to fix the copper ceiling lamp. Step 2: wiring, please pay attention to the joint must be important when wiring, otherwise there will be faults such as touching the wire and poor contact. After connecting the wire, use the electrical tape or the wiring mother to close the joint. Step 3: lock the lampshade of the all-copper ceiling lamp, and be careful not to twist the lamp body when hanging the lamp. Step 4: install the bulb and try to light it. If the lamp body is not bright, please check whether the power supply is normal and whether the wires are connected incorrectly. If individual bulbs are not on, please check whether there is any problem with the bulb. If there is no problem with the bulb, please turn off the power supply and turn off the bulb. Use a screw knife to gently pick up the Reed inside the lamp cap until the lamp is on. If this method still does not light up, please contact us and we will solve it for you as soon as possible.