Shaoguan waterproof 5630led light strip supplier

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. Waterproof 5630led lights with LED lights are usually high voltage 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires, circuit boards, etc. are generally made of copper. LED lights determine the life of the lights. For the sake of safety in electricity use, you must not choose inferior quality products just because the price is cheap. If you want to be cheap for a while, you may get a safety hazard! Of course, it is not ruled out that you can find good quality and cheap prices, but such an opportunity does not fall out of thin air. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. LED light strips need to be driven by a power supply to emit light. There are two types of waterproof 5630led light strips. There are two types of LED light strips, one is hard and hard light strips, and the other is soft light strips made of flexible materials. LED rigid light strips are assembled with PCB rigid boards. LEDs can be assembled with SMD LEDs or in-line LEDs. Different components are used according to different needs. When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strip, and compare them side by side, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. How to see the consistency of light color? You can find a piece of white paper, vertically close to the LED light-emitting surface, carefully observe the light and shadow on the white paper, and see the cleanliness of the surface of the LED strip. If the LED strip is produced by the SMT process, the surface cleanliness is very good. What kind of impurities and stains. However, if the counterfeit LED strip is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC. Waterproof 5630led light strip can judge whether the light color is consistent, is it very simple?