Shaoguan Constant Current 2835led Light Strip Factory

Although the LED strip is good, there are always times when the light output is not satisfactory. Constant current 2835led strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, and 5050 refers to the length and width of the LED light source is 50mm), both The difference is that the size is different on the one hand, and on the other hand, there are 3 LED chips in the 5050 lamp beads, so under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED lamp strip. To solve the problem of poor lighting effect, start from the source, that is, you must choose when you choose the light strip. The following small Shenzhen Lighting Factory shares a few simple tips for choosing light strips, let you become an expert in light strip selection immediately! High-brightness, high-quality imported lamp beads, high-end customized detailed product price, constant current 2835led lamp with led lamp belt is mainly used for decoration and lighting in small-scale lighting occasions such as homes, offices, shopping malls, buildings, courtyards, passages, parks, etc. , LED lights with different colors can be selected according to needs to decorate the environment and render the atmosphere. It can replace traditional incandescent lamps and energy-saving lamps. The LED lights on buildings in cities change colors alternately, which is a unique product. For product introduction information such as pictures, you can directly contact the manufacturer to obtain specific information about the high-end customization of high-brightness, high-quality imported lamp beads for the Samsung 2835 led strip. The lighting factory is a high-tech LED lighting source company integrating the research and development of LED lamp beads. It provides you with free lighting solutions for different venues and on-site guidance and testing. The quality of the constant current 2835led lamp is determined by the FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, it will also cause the pad to fall off. Years of industry experience. The company has a complete process system that checks quality layers, standardized implementation procedures, strict control cycles, and punctuality. deliver.