Professional customized hotel non-standard engineering lighting manufacturers. 400-800-7609

The key to the quality of customized hotel non-standard engineering lamps lies in the quality of hardware. If the hardware is not done well, other processes will not help. How to judge the quality of hotel non-standard engineering lighting hardware? We think it is the most appropriate standard to judge according to the different manufacturing processes of hotel non-standard engineering lamp hardware. Because there are many kinds of technologies involved in customizing the hardware of hotel non-standard engineering lamps, in order to facilitate readers to read and understand, we plan to introduce the judgment standard of the quality of customized hotel non-standard engineering lighting hardware according to nine units. Today we are going to talk about the judgment standard of customized hotel non-standard engineering lighting stamping hardware and spinning hardware: first of all, the stamping hardware and spinning hardware of customized hotel non-standard engineering lamps require no sand holes, bumps and scratches after polishing; No spinning lines, stamping marks and broken marks. (If this phenomenon can be removed after polishing, it can be accepted); No sharp edges, burrs, burrs. Secondly, the stamping hardware and spinning hardware of customized hotel non-standard engineering lamps are generally used in some non-stressed parts of customized hotel non-standard engineering lamps. However, due to the different application positions, the thickness requirements for materials are also different, mainly based on the engineering data requirements for customized hotel non-standard engineering lamps ( The standard we usually adopt is: ① lamp Cup 0. 8 materials; 2 Round chassis below 400 0. 8-1. 0 material, 400 ~ 800 more than 1. 0-1. 2,800 ~ 1000 of 1. 2-1. 5 Materials, more than 1200 (Block)1. 5-2. 0 material; (3) Bell Class 0. 8-1. 0 or more). The stamping hardware and spinning hardware of customized hotel non-standard engineering lamps are mostly connected with other accessories of the lamp body by punching, so the hole position is very important, and the drilling position must be accurate, and the hole position cannot be deformed. If you want to tap the tooth, the tooth hole must be smooth.