Are you still worried about the cleaning of all-Copper Solder lamps? Snooker Mercure all copper lamp manufacturers teach you to do it easily!
The service life of all-Copper Solder lamp is very long, but we found that when all-Copper Solder lamp is used for a long time, it will be covered with a thin layer of dust, which will make the surface of all-Copper Solder lamp lose its luster and look old, then we have to use our brains.
(1), all copper solder lamp installation environment, as far as possible moisture, home space may be kept dry, ventilated, and keep the surface of the lamp body clean. The temperature is 10-24 degrees, relative temperature is 40%-
In the 50% environment, copper ware is more likely to produce verdigris, thus affecting the beauty of all-Copper Solder lamps. Therefore, in the rainy season in the south, we should increase the frequency of drying and cleaning all-Copper Solder lamps.
(2), avoid contact with corrosive objects, and do not use corrosive liquids such as acid, grease, etc. in the cleaning process of all-Copper Solder lamps, these substances will cause a certain degree of corrosion to all copper solder lamps.
(3), let the all-Copper Solder lamp keep bright for a long time. Generally speaking, after a long period of use, the luster of the all-Copper Solder lamp will be worse than before, and the surface will become dim and without luster.
However, this problem can be solved by regular wiping. Ideally, we can wipe it with honey and then wipe it with a dry cloth.
Or we can also use tin foil or wood chips to wipe.
(4), how to avoid all copper solder lamp to produce verdigris, when the weather is humid or indoor moisture is relatively heavy, it is easy to cause all copper solder lamp to produce verdigris, or copper rust, then we can use lemonade and salt to wipe, you can also use kerosene to wipe, and then use toothpaste powder to wipe. Through these steps, you can basically restore the full Copper Solder lamp to its original brightness.