how to replace the globe on a light fixture | ehow

The globe lamp is a standard ceiling light fixture that features a glass or plastic globe covering a bulb.There are two different types of global fixtures: types characterized by screwsOn the globe (usually glass), and the type of screw that holds the globe in place.Knowing how to replace the globe on this type of fixture is the key to replacing a bad bulb or entering the socket area.Allow the light fixture to cool (if recently opened) before attempting to remove the glass ball ).The glass will hold the heat for the time being.Wear a pair of thin rubber gloves.Rubber will make it easier for you to grab the smooth globe so you can twist it.Rotate the Globe counter-clockwise.If the Earth is locked tightly, it may take several attempts to start loosening.Once it is loose, keep turning it until it is liberated from the fixture.To replace it, slide the globe over the bulb and place it in the fixed base as straight as possible.Turn the Globe clockwise and screw it in place.Take a moment so that the threads on the globe do not bend, or you may accidentally lock the globe in a curved position where it is difficult to disengage.Screw it to the right place, but don\'t overdo itTighten it, otherwise it will be much more difficult to get the globe off the next time you need to replace it.When you loosen each screw with a needle nose clamp, hold the globe with one hand.Loosen each screw until you can pull the globe away from the fixture.Replace the globe by sliding the globe back to the bulb and socket until it touches the internal base of the fixture.Tighten each screw by hand until each screw touches the Globe evenly.Continue to tighten the screws with your hands until The Globe does not move.Do not use pliers to tighten the Globe screws as you may accidentally overdoTighten the earth in case it may break.