how to install a ceiling light cover

With the various types of lamps installed on the ceiling, it is essential to understand the changes in the cover of the lamps.
Some ceiling lamp covers hold them in place using a set of three screws, while others hold them in place with clips.
The embedded light fixture with the lid uses the ring to secure the lid in the appropriate position.
Unless you can bend your elbows when reaching out to the fixture, use a small step to prevent the lid from falling.
Place the footrest directly under the ceiling lamps.
If the step stool has more than two steps, make sure you can easily balance yourself before proceeding.
Find the screws that hold the lamp cover in place and put them back in place.
Don\'t remove them.
Fix the lamp cover in place.
Next, start tightening the screws, alternating between the three so that they can impact the lamp cover evenly.
Place the footrest directly under the ceiling lamps.
If the step stool has more than two steps, make sure you can easily balance yourself before proceeding.
Find the clip that holds the lamp cover in place.
Pull them back so that the lamp cover adapts to its position.
Set the lamp cover in place and slide the clip in to fix the lamp cover on the fixture.
You may need to move them in and out using a needle and nose clamp.
Place the footrest directly under the ceiling lamps.
If the step stool has more than two steps, make sure you can easily balance yourself before proceeding.
Insert the lamp cover into the ring used to secure it in place.
Next, slide the ring into the embedded lighting until you feel it clicking in place.
Test the ring and make sure it is safe by gently pulling the ring from different places around it.
Next, wipe the ring and cover with a soft cloth as these types of fixtures show fingerprints.