For you to analyze the installation skills of all copper living room chandeliers

The installation method of the all-copper living room chandelier with the lampshade facing down is as follows. The first step is to fix the hanging plate on the ceiling. If your ceiling is cement board, please fix it with expanded screw, if it is wood structure ceiling, please use wood screw, if the ceiling is gypsum board and other materials that cannot fix screw, please contact your decorator to put a wooden square in the ceiling in advance for fixing. The second step: wiring, please pay attention to the joint must be important when wiring, otherwise there will be faults such as touching the line, poor contact, etc. After connecting the line, use the electrical tape or the wiring mother to close the joint. Step 3: hanging the light, please be careful not to twist the lamp body when hanging the living room chandelier. Step 4: install the bulb and try to light it. If the lamp body is not bright, please check whether the power supply is normal and whether the wires are connected incorrectly. If individual bulbs are not on, please check whether there is any problem with the bulb. If there is no problem with the bulb, please turn off the power supply and turn off the bulb. Use a screw knife to gently pick up the Reed inside the lamp cap until the lamp is on. If this method still does not light up, please contact us and we will solve it for you as soon as possible.