Do you know that your all-copper lamp will have a longer service life?

In the sales process, customers often mention a problem about the service life of all-copper lamps. In fact, all-copper lamps are different from lamps made of other materials. Because of their materials, there is no problem in normal use for decades. We often say that all-copper lamps are used for a lifetime; But the premise is that you know how to maintain the full copper lamp during use? The following small editor will tell you how to make all copper lamps last longer. 1. Don't be busy installing the all-copper lamps bought back first. You should carefully look at the marks of the lamps and read the installation instructions, and then install them according to the provisions of the instructions, otherwise danger may occur. 2. According to the light source parameters provided by the sign, replace the aging light source in time. If the light line of the bulb is dark or dark or the bulb is not bright, replace the lamp tube in time to prevent unsafe phenomena such as ballast burning. 3. When cleaning all-copper lamps, care should be taken not to change the structure of the lamps and lanterns, nor to replace the parts of the lamps and lanterns casually. After cleaning and maintenance, the lamps and lanterns should be installed as they are, and no missing or wrong parts and parts of the lamps and lanterns should be installed. 4. Try not to switch frequently when using all-copper lamps, because the current through the filament is greater than the current during normal operation at the moment of frequent startup of any type of lamps, the filament temperature rises sharply to accelerate sublimation, thus greatly reducing its service life, so the switch of all copper lamps should be reduced as much as possible.