Custom lighting maintenance 5 rules for the hotel

by:EME LIGHTING     2020-04-28
Browse the release date - - - - - - - If compare not decorate the hotel to the canvas, decoration as a process of painting, and the lighting is the nods eyeball pen of this picture. However, if you don't get proper cleaning and maintenance, high-grade lighting will soon again. Regular cleaning and maintenance of lamps and lanterns, in order to keep the brightness of the lighting, prolong lamp life. Chimney due to soil is dark, if not timely treatment, a year on average to reduce about % of brightness. Therefore, regular cleaning and chimney and tubes or bulbs is particularly important. In maintenance needs to pay attention to the following 5 rules first, should read the installation instructions carefully look at the mark of lamps and lanterns and, according to the instruction of installation, use the lamps and lanterns again, otherwise there may be dangerous; Second, according to the sign to provide light source parameters in a timely manner to replace aging tubes, found on both ends of the lamp is red, black or dark, jump arranged not bright, should be timely replacement bulbs, prevent unsafe phenomenon such as ballast burn out; Third, in clean maintenance should pay attention to don't change the structure of the lamps and lanterns, also don't replace the parts of lamps and lanterns, at the end of the cleaning maintenance, should install lamps and lanterns is good according to the sample, don't packing, wrong parts of lamps and lanterns; Fourth, the lamps and lanterns is in use and to strengthen the maintenance, to prolong its service life. Room of tubes should often use dry cloth to wipe, and pay attention to prevent moisture intrusion, lest in the long run, the phenomenon of the corrosion damage or leakage short circuit; If the lamps and lanterns of nonmetal, can use wet cloth to wipe, in order to avoid dust accumulation, interfere with the lighting effect; Fifth, do not frequently switch when use the lamps and lanterns, because lamp at the instant of the frequent start, through the filament current is greater than the normal work of electric current, the filament temperature rise sharply accelerated sublimation, which will greatly reduce its service life, so try to minimize the switch of lamps and lanterns. Special remind damp easily lead to rust, paint, lamps and lanterns will shorten the service life of lamps and lanterns. Moisture is the key to lighting maintenance, therefore, in order to prevent moisture intrusion, avoid corrosion damage or leakage short circuit. Lamps and lanterns is best not to clean water, as long as can wipe with dry dishcloth touchs water, dry, if accidentally run into water to try to avoid by all means after turn on the light immediately with a damp cloth to wipe. Huasheng lighting technology co. , LTD. , zhongshan city, the world's top hotel project lighting manufacturers, professional design and production of the hotel, KTV club, villas and other non-standard lighting, lamps and lanterns industry leader. Unified national service hotline -
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...