Crystal droplight factory lighting, non-standard engineering lamp, crystal droplight, hotel hotel engineering lamp customization, crystal droplight custom hotel, lobby crystal chandelier

Clean the crystal hanging lamp act the role ofing five tips with the development of the crystal hanging lamp act the role ofing, choose crystal hanging lamp act the role ofing, more and more places just dazzling crystal hanging lamp act the role ofing use for a long time and easy to be full of dust, if not washed, the longer time will affect the appearance of the lamp. So, if to safer cleaning crystal hanging lamp, crystal droplight factory below lighting will tell you to clean the crystal hanging lamp act the role ofing five tips, from then on, cleaning crystal hanging lamp act the role ofing is no longer in trouble. 1, the crystal beads to wipe clean bead, must have a soft cloth with detergent diluted water, gently wipe (at the same time in the crystal beads are back When wiping cannot hold down, in order to avoid breaking strings) 。 2, keep the balance of the lamp body if you want to clean all the strings removed, large lamps and lanterns to note down the strings of the balance of the lamp body, don't hurt the side down again on the other side and cause the lamp body tilt, lead to the lamp body or frame deformation; Should be around before and after the match the disassembly. 3, wipe the stents accessories in polished, accessories, soft cloth don't touch water can't touch alcohol water, in particular, in order to prevent chafing plating protective film outside influence the surface of the lamp shine effect. 4, pay attention to safety, wipe the lamp, to cut off the power supply; Light bulbs will unload wipe clean again after installed; Bulb precession moderation, too loose will produce poor contact; Too tight may turn bad bulbs to crystal chandelier give full play to the effect, had better choose normal transparent light bulbs, and don't grind arenaceous or color bulbs. 5, timely replacement buckle rust color beads of connection, not beautiful, two brittle crack, it is best to change, by the way; Beads found defects, should be timely completion. 6, buy special cleaning agent, spray on the crystal droplight with cleaner, together with the dust and stains volatile; Can also be crystal pendant will be removed to immerse in kerosene, soften the stains with detergent after cleaning, dry again after installation. Tips: 1, do not rotate the light body clean lamps and lanterns, don't rotate the light body, so as not to loose teeth, no safety accident. 2, check the links components should be checked at the same time the lamp body of soundness is found that the screw loose to conveniently tighten and sliding tooth dangerous spiral of the should be replaced immediately, to ensure safety. 3, keep the flat clean when the strings of the strings ( Especially the upper and lower Seine part) Beads found distorted ( With spring button round or oval, easy to appear the phenomenon) Should be adjusted to flatten effect; If it is a 'hook' with flat series, pay attention to the same button on the front of the outwards, looking inward, to beautiful, unified. Crystal droplight of zhongshan city lighting co. , LTD is a professional factory in hotel lamp, crystal engineering villa project lamp, lamp, crystal engineering of non-standard engineering lamp, club project light, KTV and other non-standard engineering lamps and lanterns manufacturer, integrating r&d, production and sales of modern enterprise. Welcome new and old customers call advisory contact.