Copper chandelier installation 6 steps easy to get
The installation of the same lamps depends on different types. Chandeliers, ceiling lamps, wall lamps, etc. have their own installation methods. The following small series introduces the installation requirements and methods of all-copper chandeliers.
First, all copper chandeliers and accessories should be complete, should be no mechanical damage, deformation, paint peeling and lampshade rupture and other defects.
Second, the bearing capacity of the fixing parts on the wall ceiling where lamps are installed shall match the weight of the selected all-copper chandelier.
Three, all copper chandelier surface must be well insulated, no joints, wire section shall not be less than 0. 4 mm².
The wiring in the hanging box should take measures to prevent the lamp from falling due to the force of the thread ends.
Hanging chains should be set for lamps weighing more than 1 kg. When the weight of chandeliers exceeds 3 kg, they should be fixed by embedded hooks or bolts.
Four, the frame of the large all-copper chandelier should be parallel to the decoration of the ceiling, and the frame of the lamp should be closely attached to the ceiling surface.
Five, screw lamp head phase line should be connected to the terminal of the center contact, zero line should be connected to the threaded terminal, lamp head insulation Shell should be complete, no damage and leakage phenomenon.
Six, fixed all copper chandelier hook, its diameter should not be less than all copper chandelier hook, and the minimum diameter of the lamp shall not be less than 6mm.